Incipient Fracture of Ceramics Under Ballistic Impact

ORAL

Abstract

We will present results of small-scale terminal ballistic experiments of pure copper rods impacting commercial grade boron carbide and silicon carbide at striking velocities ranging from 1-2.5 km/s. Incipient deformation and fracture of these materials was examined using propagation-based phase contrast imaging (PCI) at a characteristic interval of 153.4 ns in the first 1-2 microseconds after impact. At the lowest striking velocities, the penetrator undergoes dwell or interface defeat and the target response is consistent with the cone crack formation at the impact site. At higher striking velocities there is a distinct transition to massive fragmentation leading to the onset of penetration. Continuum and microstructural scale simulations of the response will be used to assist in describing the critical stress states and resulting failure modes.

*This publication is based upon work performed at the Dynamic Compression Sector, which is operated by Washington State University under the U.S. Department of Energy (DOE)/National Nuclear Security Administration award no. DE-NA0002442. This research used resources of the Advanced Photon Source, a DOE Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under contract no. DE-AC02-06CH11357.

Authors

  • Brian Schuster

    • Army Research Laboratory
  • Andrew Tonge

    • Army Research Laboratory
  • Nicholas Lorenzo

    • Army Research Laboratory