Additive Manufacturing of Soft Materials: Novel Characterization and Processing Strategies
FOCUS · A49 ·
Presentations
-
In-situ X-ray and thermal imaging of 3D printed PLA
ORAL
–
Presenters
-
Miriam Rafailovich
- Stony Brook University
- Department of Materials Science and Chemical Engineering, Stony Brook University
Authors
-
Miriam Rafailovich
- Stony Brook University
- Department of Materials Science and Chemical Engineering, Stony Brook University
-
Yuval Shmueli
- Department of Materials Science and Chemical Engineering, Stony Brook University
-
Jiaolong Jiang
- Department of Materials Science and Chemical Engineering, Stony Brook University
-
Yuchen Zhou
- Department of Materials Science and Chemical Engineering, Stony Brook University
-
Guangcui Yuan
- Center for Neutron Research, NIST
-
Sushil K Satija
- Center for Neutron Research, NIST
-
Sungsik Lee
- APS, Argonne National Laboratory
-
Taejin Kim
- Department of Materials Science and Chemical Engineering, Stony Brook University
-
Gad Marom
- Casali Instutute for Applied Chemistry, Hebrew University of Jerusalem
-
Dilip Gersappe
- Department of Materials Science and Chemical Engineering, Stony Brook University
-
-
XPCS <i>in operando </i>Monitoring of Dynamic Recovery in 3D Printed Thermoset Nanocomposites
ORAL
–
Presenters
-
Kyle Johnson
- Air Force Research Laboratory
Authors
-
Kyle Johnson
- Air Force Research Laboratory
-
Lutz Wiegart
- National Synchrotron Light Source II, Brookhaven National Laboratory
- NSLS II, Brookhaven National Laboratory
-
Andrew Abbott
- Materials Engineering, University of Dayton Research Institute
-
Hilmar Koerner
- Air Force Research Laboratory
-
-
Processing, Morphology, and Crosslink Network in Model Liquid Crystalline Thermosets for Additive Manufacturing
ORAL
–
Presenters
-
Edward Trigg
- RXCCM, Air Force Research Laboratory
Authors
-
Edward Trigg
- RXCCM, Air Force Research Laboratory
-
Hilmar Koerner
- Air Force Research Laboratory
- RXCCM, Air Force Research Laboratory
-
-
Feedstock development and in-operando experiments for 3D printing of polymer matrix composites for demanding defense applications
Invited
–
Presenters
-
Hilmar Koerner
- Air Force Research Laboratory
- RXCCM, Air Force Research Laboratory
Authors
-
Hilmar Koerner
- Air Force Research Laboratory
- RXCCM, Air Force Research Laboratory
-
-
In-situ X-ray and thermal characterization of nanocomposites in FDM 3D printing
ORAL
–
Presenters
-
Yuval Shmueli
- Department of Materials Science and Chemical Engineering, Stony Brook University
Authors
-
Yuval Shmueli
- Department of Materials Science and Chemical Engineering, Stony Brook University
-
Sungsik Lee
- APS, Argonne National Laboratory
-
Taejin Kim
- Department of Materials Science and Chemical Engineering, Stony Brook University
-
Gad Marom
- Casali Instutute for Applied Chemistry, Hebrew University of Jerusalem
-
Dilip Gersappe
- Department of Materials Science and Chemical Engineering, Stony Brook University
-
Miriam Rafailovich
- Stony Brook University
- Department of Materials Science and Chemical Engineering, Stony Brook University
-
-
Molecular weight dependence of weld formation in material extrusion additive manufacturing
ORAL
–
Presenters
-
Jon Seppala
- National Institute of Standards and Technology
Authors
-
Jon Seppala
- National Institute of Standards and Technology
-
-
Geometrical and Mechanical Characterization of Interlayer Bonding Quality in Fused Filament Fabrication
ORAL
–
Presenters
-
Lichen Fang
- Johns Hopkins University
Authors
-
Lichen Fang
- Johns Hopkins University
-
Yishu Yan
- Johns Hopkins University
-
Ojaswi Agarwal
- Johns Hopkins University
-
Kevin Hemker
- Johns Hopkins University
-
Sung Kang
- Mechanical Engineering, Johns Hopkins University
- Johns Hopkins University
-
-
Effect of processing on semicrystalline morphology in the additive manufacturing of poly(lactic acid)
ORAL
–
Presenters
-
Anthony Kotula
- National Institute of Standards and Technology
Authors
-
Anthony Kotula
- National Institute of Standards and Technology
-
Jonathan Seppala
- National Institute of Standards and Technology
-
Claire McIlroy
- School of Mathematical Sciences, University of Nottingham
-
-
Flow-Enhanced Crystallisation in Fused Filament Fabrication
ORAL
–
Presenters
-
Claire McIlroy
- University of Nottingham
Authors
-
Claire McIlroy
- University of Nottingham
-
Anthony Kotula
- National Institute of Standards and Technology
-
Jonathan Seppala
- National Institute of Standards and Technology
-
Richard Stephen Graham
- University of Nottingham
-
-
Implications of Crystallization on the Performance of Polyphenylene Sulfide with Material Extrusion Additive Manufacturing
ORAL
–
Presenters
-
Meisha Shofner
- Georgia Institute of Technology
Authors
-
Meisha Shofner
- Georgia Institute of Technology
-
Emily Fitzharris
- Georgia Institute of Technology
-
David Rosen
- Georgia Institute of Technology
-
-
Facilitating Improved Isotropy in Fused Deposition Modeling Utilizing UV Initiated Reactive Processing
ORAL
–
Presenters
-
Neiko Levenhagen
- University of Tennessee
Authors
-
Neiko Levenhagen
- University of Tennessee
-
Mark Dadmun
- University of Tennessee, Knoxville
- University of Tennessee
-
-
Axisymmetric Simulation of Viscoelastic Filament Thinning and Laser-Induced Forward Transfer with the Oldroyd-B Model
ORAL
–
Presenters
-
Emre Turkoz
- Princeton University
Authors
-
Emre Turkoz
- Princeton University
-
Luc Deike
- Princeton University
-
Craig Arnold
- Department of Mechanical and Aerospace Engineering, Princeton University
- Princeton University
-
-
Laser sintering of polymer particle pairs studied by in-situ visualization
ORAL
–
Presenters
-
Ruth Cardinaels
- Eindhoven University of Technology
Authors
-
Prakhyat Hejmady
- Eindhoven University of Technology
-
Ruth Cardinaels
- Eindhoven University of Technology
-
Lambèrt van Breemen
- Eindhoven University of Technology
-
Patrick D Anderson
- Eindhoven University of Technology
-